JVC TM-A170G Instrucciones página 11

DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION
• V. POSITION
• WHITE BALANCE
Notes:
● Parameters for H. POSITION and V. POSITION can be set separately depending on
the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected with the input
select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value.
Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
1. While pressing the MENU button, press the
CHROMA/PHASE button.
MENU
CHROMA
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
CHROMA CONTRAST
PHASE BRIGHT
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
3. Press the VOLUME/SELECT buttons to set.
VOLUME/SELECT
LCT1266-001A-H(EN)
• CONTROL LOCK • ASPECT REMOTE
• STATUS DISPLAY
• INPUT REMOTE
The <SET-UP MENU> screen is displayed.
A selection mark (4) is put next to the selected item.
Front panel Function
button displayed
CHROMA/
PHASE
CONTRAST/
BRIGHT
Front panel Function
button displayed
+
VOLUME/
4
SELECT (+)
CUTO
–
VOLUME/
1
SELECT (–)
DRV
Notes:
● For WHITE BALANCE items, select the CUT OFF or DRIVE
setting screen, then select the function display for adjustment.
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
11
Contents
Forwards selection mark ( 4 )
Reverses selection mark ( 4 )
Contents
Increases (to max. value)
Forwards the setting value
Selects CUT OFF setting screen
Decreases (to min. value)
Reverses the setting value
Selects DRIVE setting screen
02.7.5, 9:36 AM
<SET-UP MENU> screen
1
<SET-UP MENU>
‰ H. POSITION
: 00
V. POSITION : 00
WHITE BALANCE
CONTROL LOCK : OFF
STATUS DISPLAY : ON
INPUT REMOTE : OFF
ASPECT REMOTE : OFF
2
EXIT
CHROMA CONTRAST VOLUME/SELECT MENU
PHASE BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forwards the menu item.
Reverses the menu item.
– Lowers the adjustment
value. (to the minimum)
+ Raises the adjustment
value. (to the maximum)
4
Forwards the setting value.
1 Reverses the setting value.
Exits the <SET-UP
EXIT
MENU> screen.
DRV Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
RB
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)
3
4
9