inbody 970 Manual De Usuario página 10

Caution
• The device may get damaged or malfunctioned due to the electric if plugging into an ungrounded outlet.
Or the test results may be inaccurate.
• If InBody970 is subjected to electrical interference, the test results may be inaccurate. Do not install InBody970 in close
proximity with fluorescent lights, equipment with a large AC motor such as treadmills, vibrating platform refrigerators,
air conditioners, compressors, etc., high-frequency heat treatment devices, and heating devices that cause electrical
interference. Unplug and plug them into different power outlets when InBody970 and a device that causes electrical
interference are connected to the same power outlet.
• If you are connecting the InBody970 to other device then turn on the other device first.
On the contrary, turn off the power of InBody970 first, and then turn off the power of the other device when turning off
the power. This can minimize the electric shock to the InBody970.
• Use the adapter provided by InBody. The InBody970 may malfunction when using other adapters.
• If you are operating the device in a place where the altitude is 2,000m or higher, the weight measurement may be
affected.
• Do not use InBody970 near heat sources such as heating appliances. It may cause deformation, breakdown or fire by heat.
• Use InBody970 in a location where it is not exposed to direct sunlight. It may cause discoloration or damage of
device.
• Be careful not to pull the cables connected to the device. Otherwise, it may cause a weight measurement
error.
6. Press the power switch to turn it on.
8
Power Switch