inbody 970 Manual De Usuario página 35

3. Rear view
Rear Cover: Used for inspecting internal inspections, etc. Verified InBody service engineer can only open it.
❶
LAN Port (10/100T-Base): Connect the InBody970 to the Internet or LookinBody120 installed on the PC
❷
via wire connection.
* You can connect the InBody970 to LookinBody120 installed on the PC if at least one of ❷, ❹,
USB HOST Port: Connect printer, USB thumb drive and barcode reader.
❸
USB SLAVE Port: Connect the InBody970 to LookinBody120 installed on PC.
❹
You can connect the InBody970 to LookinBody120 installed on the PC if at least one of ❷, ❹,
*
PC 9-pin Serial Terminal (Female, RS-232C): Can be used to connect the InBody970 with LookinBody120 installed on
❺
the PC.
You can connect the InBody970 to LookinBody120 installed on the PC if at least one of ❷, ❹,
*
Stadiometer 9-pin Serial Terminal (Female, RS-232C): Connect the InBody970 with a stadiometer.
❻
* Make sure to connect only InBody stadiometer.
Blood Pressure Monitor 9-pin Serial Terminal (Female, RS-232C): Connect the InBody970 with a blood
❼
pressure monitor.
* Make sure to connect only InBody Blood Pressure Monitor.
Power Jack: Connect a power adapter.
❽
* Use the adapter provided by only InBody.
Power Switch: Turn the device on and off.
❾
❶
ports is connected.
❺
ports is connected.
❺
ports is connected.
❺
❷
❸
❹
❻
❽
EN
❺
❼
❾
33