inbody 970 Manual De Usuario página 31

Question
The touch screen does
•
not work well.
How to connect with the
•
compatible devices.
InBodyBAND is not
•
recognized.
Fingerprint recognition
•
does not work well.
Calibrate the touchscreen under Settings of the Administrator Menu
•
'23. Touchscreen Alignment'.
* Press firmly to optimize touchscreen response.
Please refer to "E. Connecting Compatible Devices" in "I. InBody
•
Installation" in this User's Manual.
Check whether other people's InBodyBAND are near the hand electrodes.
•
If there are too many Bluetooth devices around, the connection may delay.
•
If InBodyBAND is not properly connected, turn off or deactivate unused
•
Bluetooth devices to improve the recognition rate.
Fingerprint recognition may not work well if the subjects' finger prints are
•
worn out due to their working conditions/environment.
If the fingerprint is not recognized well, place the fingerprint to the same
•
location that was originally registered, or update the fingerprint information
with new one.
Answer
EN
29