inbody 970 Manual De Usuario página 18

2. Connecting Bluetooth
1) Press the [Administrator Menu] on the test standby screen.
2) Enter the password to enter the Administrator Menu.
3) Go to the "17. Connecting Bluetooth" in Setup.
4) If "O" is selected on "Connect via Bluetooth?", you can select "LookinBody" or "Compatible device". Then, please select the
"Compatible device" for device connection..
* While InBody970 and LookinBody120 are already connected via Bluetooth, and if you are trying to connect other compatible
devices via Bluetooth, the original connect between InBody970 and LookinBody120 will stop.
5) Turn on one of the InBody recommended compatible device and check the product name and serial number on the name
plate attached to the compatible device.
6) Choose the compatible device to be connected and then press [Next]
7) The compatible device's Bluetooth ID consists of "Product Name-Serial Number", and select the Bluetooth ID of the
device to be paired and press [Connect]
* If the Bluetooth ID does not appear or the connection is not good, please contact InBody Customer Service.
16