Coffee Temperature; Languages; Create And Edit Profiles; Set Auto-Off - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

Please note:
• After carrying out the above procedure, we recommend
making at least 3 coffees before adjusting again. If the
coffee is still not brewed correctly, repeat the procedure.
• The grinding coarseness regulator (A3) must only be
turned when the coffee grinder is in operation during the
initial phase of coffee preparation.

7.5 Coffee temperature

To change the temperature of the water used to make the cof-
fee, proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Coffee temperature" is
displayed;
3. Press "Set";
4. Select the required temperature from those proposed;
5. Press "<" to enter the settings menu.
Please note:
Varying the temperature has most effect for long beverages.

7.6 Languages

To change the language on the homepage, proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Languages" is displayed;
3. Press "Next";
4. Press the flag corresponding to the language you want
to set (press "Next" or "Back" to display all the languages
available). The display is immediately updated with the
selected language;
5. Press "<" to save the new selection and go back to the set-
tings menu;
6. Press "X" to go back to the homepage (C).

7.7 Create and edit profiles

You can use this function to modify the image and color of the
icon for each profile. To customize the icon, proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Create and edit profiles" is
displayed;
3. Press "Next";
4. To create a new profile, press "Add new";
To edit an existing profile, select the profile and press
"Edit";
5. Customize as you wish, then press "Save" to confirm.
6. Press "<" to save the new selection and go back to the
homepage (C).
7.8

Set auto-off

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1 or 3 hours of inactivity.
To programme auto-off, proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Set auto-off" is displayed;
3. Select the desired time interval (15 or 30 minutes, or 1 or
3 hours).
4. Press "X" to save the new selection and go back to the
homepage (C).

7.9 General

1. Press the settings menu (C3);
2. Scroll through the pages until "General" is displayed;
Here you can enable or disable the following functions with a
simple touch:
- "Beep sound": when enabled, the appliance beeps when-
ever an operation is performed.
- "Energy saving": use this function to enable or disable en-
ergy saving. When enabled, the function reduces energy
consumption in compliance with European regulations.
is displayed on the homepage to show it is active.
3. Press "X" to save the new selection and go back to the
homepage (C).

7.10 Water filter

For instructions on the filter (D4), see section "19. Water soften-
er filter"".

7.11 Water hardness

For instructions on setting water hardness, see section "18. Set-
ting water hardness".

7.12 Default values

This resets all menu settings and user customisation back to
the default values (with the exception of the language, which
remains as set, and the statistics).
Proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Default values" is displayed;
3. Press "Next":
4. Select whether you want to reset the entire appliance or a
single profile, then press "Next";
5. Follow the instructions, then confirm the reset by pressing
"OK". The machine displays the homepage (C) again.
Please note:
When the appliance (not the individual profile) has been reset
to the default values, the machine proposes the introductory
tutorial again.

7.13 Drain water

To avoid the water in the circuit freezing if the appliance is to be
left idle for a long period of time, or before taking it to customer
services, we recommend emptying the water circuit.
Proceed as follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Drain water" is displayed;
3. Press "OK" to start the guided procedure;
10