Turning The Appliance On U - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

1. Connect the appliance to the mains supply (fig. 1).
2. Press the flag corresponding to the desired language and
confirm the selection by pressing "Done".
Now follow the instructions indicated on the display of the
appliance:
3. Remove the water tank (A20) (fig. 2) and fill to the MAX
line with fresh water (fig. 3);
4. Then put the tank back and confirm by pressing "Next";
5. Fill the beans container (A2) (fig. 4), then confirm by press-
ing "Next".
6. Insert the hot water spout (D6) on the accessories con-
nector (A8) (fig. 5) and place a container with a minimum
capacity of 6,76 fl oz/200 ml under the coffee spouts (A7)
and hot water spout (fig. 6);
1
MAX
2 2
4
7. Press "OK" to fill the water circuit. The appliance delivers
water from the hot water spout (fig. 7);
8. At the end of delivery, the appliance proceeds to warm up
by performing a rinse cycle, delivering hot water from the
coffee spouts (fig. 8).
When at temperature, the appliance proposes a tutorial on how
3 3
to use the machine.
Please note:
• The first time you use the appliance, you need to make
4-5 cappuccinos before the results in the cup will be
satisfactory.
• The first time you use the machine, the water circuit is
empty and the appliance could be very noisy.The noise
becomes less as the circuit fills.

5. TURNING THE APPLIANCE ON U

Please note:
• Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is not ready for use until the cycle has been
5
completed.
1. To turn the appliance on, press the
9): the appliance comes on.
8
6
8
button (A9) (fig.
7