DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso página 27

DISPLAYED MESSAGE
Water circuit empty. Press OK to
start filling process
*Models with Wi-Fi connectivity:
MEANING
The water circuit is empty
A new water softener filter has been
inserted (D4)
Energy saving is enabled.
The machine must be descaled.
The filter must be replaced (D4)
Remember to clean the milk carafe (E) or
(F).
The connection is configured in the appli-
ance settings menu (C3).
Indicates that the appliance is connected.
Connectivity is active, but the cloud cannot
be reached.
27
SOLUTION
Press "OK" to fill the circuit. Delivery stops au-
tomatically. It is normal for there to be water
in the drip tray (A15) after filling.
If the problem persists, make sure the water
tank (A20) is fully inserted.
Make sure you have followed the instructions
for inserting the new filter (sections "19.1
Installing the filter" and "19.2 Replacing or
removing the filter"). If the problem continues,
remove the filter (section "19.2 Replacing or
removing the filter").
To disable energy saving, proceed as described
in section "7.9 General".
The descaling procedure described in section
"17. Descaling" needs to be performed.
Replace the filter or remove it as described in
section "19. Water softener filter".
Turn the froth adjustment dial (E3) or (F3) to
CLEAN.
Connect to the Coffee Link App.
To disable the connection, proceed as de-
scribed in section "7.3 Connectivity (certain
models only)".
If just turned on, wait for the appliance to
complete the start up procedure.
If the problem continues, disable the connec-
tion then enable again as described in section
"7.3 Connectivity (certain models only)".
Make sure the lights on the router indicate
that the network is active.
If the problem continues, turn the appliance
and home router off then on again.