Statistics; Beverage Selection - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

4. Extract, empty and replace the grounds container (A10)
and drip tray (A15) (fig. 10), then press "Next";
5. Insert the spout (D6) on the connector (A8) (fig. 5);
6. Position a 100 ml container under the spouts (fig. 6). Press
"Next";
7. The appliance performs a rinse cycle with hot water from the
spouts;
8. At the end of rinsing, extract the water tank (A20) (fig. 11)
and empty;
9. If present, remove the water softener filter (D4) from the
water tank and press "Next";
10. Put the empty water tank back in the appliance and press
"Next";
11. Wait for the appliance to empty the circuit; (Important:
hot water from the spouts!). As the water circuit empties,
the appliance could become noisier. This is part of normal
operation.
12. When the circuit is empty, extract and empty the drip tray,
put back in the appliance and press "Next";
13. Press "OK". The appliance goes off (standby).
The next time the appliance is turned on, follow the instructions in
section "4. Setting up the appliance u".

7.14 Statistics

This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press the settings menu (C3);
10
11
11
2. Scroll through the pages until "Statistics" and the principal
statistics are displayed. To view more information, press
"Read more";
3. Press "<" to go back to the settings menu.

8. BEVERAGE SELECTION

You can use your machine to make a great variety of beverages.
the beverages indicated by this symbol are also available
in the "To Go" menu.
Espresso
2X Espresso
Coffee
Doppio+
Long
Americano
Coffee pot
Over ice
Cappuccino
Latte Macchiato
Latte
Cappuccino Mix
Espresso Macchiato
Flat White
Cappuccino +
Cortado
Milk
Tea function
Hot water
From the panel, access the type of beverage you want to make
(Hot, Cold, To Go-In Travel Mug) and fit the necessary accessories.
Hot Cold
✕
✓
✕
✓
✕
✓
✕
✓
✕
✓
✓ ✓
✕
✓
✕
✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✕
✓
✓ ✓
✕
✓
✕
✓
✓ ✓
✕
✓
✕
✓