EGO SNT2120AP Manual Del Operador página 21

To Stop the Snow Blower
1. Fully release the bail switch
(Fig. 14).
2. The electric brake in the Automatic
Braking Mechanism will stop the
auger rotation within 3 seconds of
the bail switch release.
Variable-Auger-Speed System
(Fig. 15)
The speed of the auger determines the
throwing distance. The speed of the auger
is variable and can be adjusted using the
auger-speed dial.
1. To increase the speed, move the
auger-speed dial away from the
operator.
2. To decrease the speed, move the auger-speed dial towards the operator.
Heated grip (Fig. 15)
The grip area could be heated to provide warmth for your hands.
WARNING:
before turning the grip-heating on. Unprotected skin could suffer burn injury from
contact with exposed heating elements.
1. Press the grip-heating switch to heat the grip area. The switch light will illuminate
when the heating is turned on.
2. Press the grip-heating switch again to turn off the heating. The switch light will
turn off.
NOTE:
When the heating is turned on, the temperature of the heated grip will be
maintained between 95°F (35°C) and 131°F (55°C).
NOTE:
The heating will turn off automatically when the snow blower is inactive for 10
minutes to preserve the battery charge.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC
Ensure that the rubber coating is intact at the heated grip areas
14
Safety Button
(Fully released)
15
Auger-Speed Dial
Faster
Heated Grip
Slower
Grip-Heating Switch
Bail Switch
(Fully released)
Heated Grip
LED Headlights Switch
21