FOLDING THE SIDE RAILS
1. Push the chute-rotation handle all
the way forward so that the chute
is facing left, which will ensure
causing no interference when
folding. Squeeze the trigger on the
chute deflector handle to tilt it all the
way down (Fig. 31).
2. Open the quick-release levers on
both sides to fold the side rails to
the storage position (Fig. 32).
LIFTING AND CARRYING THE
SNOW BLOWER
1. Remove the battery pack(s).
2. Fold the side rails as described in
the previous chapter.
3. Lift and carry the unit by grabbing
the lift handle with one hand and the
lift area, on top of the snow intake
(right below the EGO logo), with the
other hand (Fig. 33).
WARNING:
Lift with your legs – not with your back.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC
Snow blower is heavy!
31
2
32
33
Lift Area
1
2
1
Lift Handle
33