Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Indigo® NXT or Indigo® Model
22" & 30" Wide Single Evaporator
Installation
Disconnect power to ice machine at the
electrical disconnect. Pressing the power
button does not disconnect line voltage.
1.
Disconnect all power to the ice
machine at the electrical disconnect.
2.
To allow access for the LuminIce®
tubing, the evaporator dust cover and
plastic caps in the evaporator and
compressor compartment bulkhead
wall must be removed and discarded.
Remove Plastic Caps From Bulkhead In The
Evaporator And Compressor Compartment
Part Number: 000014110 Rev 01 1/19
Warning
Section 2
Installation
3.
Assemble bracket to left-hand top rail
with three provided screws.
Mount Bracket With Three Screws
4.
Assemble LuminIce® to bracket with
three screws provided. The bulb and
bulb wiring must face toward the
rear of the ice machine to allow bulb
replacement with LuminIce® in place.
Attach With
Three Screws
9
Publicidad
Tabla de contenido
