Stihl FS 85 Manual De Instrucciones página 62

English
5.2.1 Mounting the Handlebar
6
4
2
► Mount the handlebar (1) on the drive tube (2)
about 40 cm (16 in) (A) from the engine.
► Place the clamp (3) and handle support (4)
against the drive tube.
► Fit the handlebar (1) in the handle support –
the rubber handle must be on the left (viewed
from the engine).
► Place the clamp (5) on the handle support.
► Insert the screws (6) through the holes in the
parts and screw them into the clamp (3) as far
as stop.
► Line up the handlebar.
► Tighten down the screws firmly.
62
6
5
1
3
A
5.2.2 Mounting the Control Handle
9
7
8
► Take out the screw (7) – the nut (8) remains in
the control handle (9).
► Push the control handle onto the handlebar (1)
until the holes (11) line up – the throttle trig‐
ger (10) must point towards the gearbox.
► Insert the screw and tighten it down firmly.
5 Mounting the Bike Handle
10
11
1
11
0458-393-8721-C