Makita VC009G Manual De Instrucciones página 7

Ocultar thumbs Ver también para VC009G:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Fig.2
► 1. Indicator lamps 2. Check button
Indicator lamps
Lighted
Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
1
2
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
Indicating the remaining battery
capacity
Fig.3
► 1. Battery indicator 2.
Press the
button to indicate the remaining battery
capacities.
Battery indicator status
On
Appliance / battery protection
system
The appliance is equipped with appliance / battery pro-
tection system. This system automatically cuts off power
to the motor to extend appliance and battery life. In this
situation, the battery indicator lights up as following table.
Battery indicator status
On
The appliance will automatically stop during operation
if the appliance or battery is placed under one of the
following conditions:
7 ENGLISH
1
2
button
Off
Blinking
Off
Blinking
Overdischarge
Remaining
battery
capacity
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
Status
Overload
protection
(battery) /
Overheat
protection
(battery) /
protection
Overheat
protection
(appliance)

Publicidad

Tabla de contenido
loading

Tabla de contenido