Rpg 2.5 (Cordless) Tool Support - Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original

RPG ONE, RPG 1.5, RPG 2.5
3.7

RPG 2.5 (cordless) tool support

The tool support of the RPG 2.5 (Cordless) offers different tool holder assembly possibilities, according to type of application:
• Facing (1) of 6.35 - 12.0 mm (0.250" - 0.472")
• Facing (2) of 12.7 - 65 mm (0.500" - 2.559")
• Beveling (3), dimension range as per bevel tool.
NOTE!
2
Tool support without tool holder
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN
• The tool holder (4) should be assembled in one of the 6 fastening threads (5) as a
function of the above listed processing type and tube outer diameter.
• The bigger the outer diameter of the tube, the further apart are the fastening threads
selected for the tool holder (see arrows).
• For exact positioning, install the tool holder (4) with a multifunctional tool in the groove
guide (6) and screw it in as a function of the desired processing type along the groove
guide and using the correct fastening thread (5).
• The groove guide (6) has markings to help position the tool holder (4).
1
3
Tool support with tool holder
Product design
5
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
6
4
53