Orbitalum RPG ONE Traducción Del Manual De Instrucciones Original página 62

ENGLISH
Setup and assembly
WARNING!
WARNING!
ATTENTION!
62
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Flying, hot and sharp­edged chips, tube surfaces, cutting edges and tools!
Danger of injury to eyes and hands.
X Do not touch the rotating tool while the machine is in operation.
X Never work without attached viewing window covering the work area.
X Wear recommended protective clothing, as described in chap. 2.4, p. 46.
X At the end of each working cycle Maschine ausschalten, switch off the machine, wait un-
til the machine/tool stops running and pull the mains plug and/or take the rechargeable
battery out of the machine. Remove chips with tightfitting safety gloves (in accordance
with DIN EN 388 and EN 407) using suitable tools (e.g. tongs or screwdriver).
X Ensure that the viewing window is functional.
Machine start­up due to unintentional
pressing of the ON/OFF switch!
Diverse physical injuries and material damage.
X When carrying out a tool change, cleaning,
maintenance, adjustment and repair to the
machine, do not hold it as shown to the right
so that the ON/OFF switch is pressed against
the workbench (see arrow).
The MFW multifunctional tool may be damaged by wrong inserting of a tube!
Damage to tool.
X Before clamping the tube, ensure sufficient distance between the MFW and the tube.
RPG ONE, RPG 1.5, RPG 2.5
[REV. 20190314] OC_RPG_S_BA_790036765_00__INH-02_EN