Handlebar Positioning - Lavorwash QUICK 36E Manual

5. INSTALLATION INFORMATIONS
5.1.

HANDLEBAR POSITIONING

To place the machine handlebar in the working posi-
tion (handlebar opened) it is necessary to operate the
handlebar release pedal ( Photo 9 - A );
press the pedal, pull the handlebar upward and place
it in the working position wished.
The handlebar can be set in three fixed positions: one
"handlebar closed" position for the machine storage
or the machine transportation in a car ( Photo 10 ) and
two "handlebar opened" working positions ( Photo 11
and Photo 12).
Photo 11
Handlebar opened - middle position.
To operate in small spaces it is recom-
mended to set the handlebar in this
position.
5. INSTALLATION INFORMATIONS
36
A
Photo 9
Photo 10
Handlebar closed position
Photo 12
Handlebar opened