Flexible Induction Cooking Area; Flexibridge Function - AEG IPE84571FB Manual De Instrucciones

Mode H6
1) The hob detects the boiling process and acti‐
vates the fan speed in accordance with the auto‐
matic mode.
2) The hob detects the frying process and acti‐
vates the fan speed in accordance with the auto‐
matic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic
mode
1. Deactivate the appliance.
2. Touch
The display comes on and goes off.
3. Touch
4. Touch
on.
5. Touch
automatic mode.
When you finish cooking and deactivate
the hob, the hood fan may still operate

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!
Refer to Safety chapters.

6.1 FlexiBridge function

The flexible induction cooking area
consists of four sections. The sections
can be combined into two cooking zones
with different size, or into one large
cooking area. The sides of the zones
which operate together light up, and they
are linked with shorter illuminated lines.
You choose the combination of the
sections by choosing the mode
applicable to the size of the cookware
you want to use. There are three modes:
Standard (activated automatically when
you activate the hob), Big Bridge and
Max Bridge.
Auto‐
1)
Boiling Frying
matic
light
On Fan Fan
speed 2 speed 3
for 3 seconds.
for 3 seconds.
a few times until comes
of the Timer to select an
for a certain period of time. After that
time the system deactivates the fan
2)
automatically and prevents you from an
accidental activation of the fan for the
next 30 seconds.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press
speed by one. When you reach an
intensive level and press
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
the fan speed 1 touch
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
To set the heat setting use
two left side control bars.
Switching between the modes
To switch between the modes use
sensor field:
ENGLISH
, you raise the fan
again, you
.
.
13