Publicidad
Step 22
Pull the extensions of the RAILS (1 and 2) out from the
å
RAILS. Insert the DRAWER (Z) so it rests on the brackets
of the RAILS. Line up the holes in the DRAWER SIDES (U
and V) with the brackets on the RAILS.
Fasten the DRAWER (Z) to the RAILS (1 and 2). Use four
å
BLACK 1/2" FLAT HEAD SCREWS (19).
Page 26
1
V
BLACK 1/2" FLAT HEAD SCREW
(4 used in this step)
www.sauder.com
2
U
Z
19
423912
Publicidad
