Overview Of Led Displays; Help With Problems / Faq - Beyerdynamic Xelento wireless Instrucciones De Uso

Operation

Overview of LED displays

LED DISPLAY
Flashes red/yellow/green
Steady green light
Lights up once red for 1.5 sec
Flashes rapidly red
Slowly flashes alternately blue and red
Briefly flashes blue every 7 sec
Briefly flashes blue every 3 sec
Briefly flashes white every 7 sec
Briefly flashes blue every 7 sec
Flashes rapidly blue
Briefly flashes blue every 7 sec
Lights up pink 3x per sec

Help with problems / FAQ

Xelento wireless cannot be switched on.
Battery is empty or almost empty
No audio output.
There is no Bluetooth® connection
Xelento wireless does not appear in the available Bluetooth® devices in the playback
device
Xelento wireless is switched off
Xelento wireless is not in pairing mode
There is already a Bluetooth® connection to
another playback device
Playback is too quiet, even though it is set to maximum on Xelento wireless.
The audio signal being played back is too
quiet.
FUNCTION
Charging
Fully charged
Switch off
Battery almost empty
Bluetooth® pairing mode active
Bluetooth® connection active
Bluetooth® connection lost
Media playback active (LHDC, aptX™ HD)
Media playback (other codecs)
Incoming call
Call active
Software update mode active
► Charge the battery.
► Connect Xelento wireless with the
playback device.
► Switch on Xelento wireless.
► Place Xelento wireless in pairing mode.
► Disconnect the Bluetooth® connection to
the other and place Xelento wireless near
the desired device.
► Set playback volume on the playback
device to maximum.
23/30