Jet Nozzle - Steamfast SF-294 Guia Del Usuario

STEAM CLEANER SETUP

JET NOZZLE

CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Jet Nozzle with Steam Nozzle as shown (FIGURE 4).
2. Slide Jet Nozzle into Steam Nozzle, pressing  rmly until release button snaps through hole.
3. To remove Jet Nozzle, press  rmly on release button while simultaneously pulling Jet Nozzle
away from Steam Nozzle.
JET
NOZZLE
RELEASE
BUTTON
UTILITY BRUSHES
CAUTION: Metal tip of Jet Nozzle becomes hot during use. Always allow unit to cool
before connecting/disconnecting any accessories.
1. Align Utility Brush with tip of Jet Nozzle as shown (FIGURE 5-A), and press it  rmly on as far
as it will go. Screw Utility Brush onto Jet Nozzle as shown, until secured tightly in place
(FIGURE 5-B).
A
8 | ENGLISH
Assembling Your
3-in-1 Steam Mop
STEAM
NOZZLE
HOLE
FIGURE 4
FIGURE 5
B