Wireless Connection - Electrolux KEGB9410W Manual De Instrucciones

6.6 Key tones
The buttons on the control panel make a
click sound when you press them. You
can deactivate this sound.
6.7 Latest programme selection
You can set the automatic selection of
the most recently used programme and
options.

7. WIRELESS CONNECTION

You can connect your dishwasher to the
home wireless network and then link it to
your mobile devices in My Electrolux
Kitchen app. This functionality allows you
to remotely control and monitor your
dishwasher.
My Electrolux Kitchen app can be
downloaded from the app store on your
mobile device. The app is compatible
with iOS and Android operating systems.
Check the compatible versions of the
operating systems in the app store.
Wi-Fi module parameters
Wi-Fi mod‐
ule
Frequency/
Protocol
Max Power
Encryption
7.1 How to connect the
dishwasher to the network and
to the app
To connect your dishwasher, you need:
NIU5-50
Wi-Fi: 2.4 GHz / 802.11
b-g-n
Wi-Fi: 5 GHz / 802.11
a-n (for indoor use only)
Bluetooth Low Energy
5.0: 2.4 GHz / DSSS
Wi-Fi 2.4 GHz: <20
dBm
Wi-Fi 5 GHz: <23 dBm
Bluetooth Low Energy
5.0: < 20 dBm
WPA, WPA2
The latest programme that was
completed before the appliance
deactivation is saved. It is then selected
automatically after you activate the
appliance.
When the latest programme selection is
disabled, the default programme is ECO.
• Wireless network with the Internet
connection.
• Mobile device connected to the
wireless network.
1. Launch My Electrolux Kitchen app on
your mobile device and follow the
instructions in the app. When
prompted in the app, activate the
wireless connection in the
dishwasher.
2. To activate the wireless connection,
press and hold simultaneously
for 2 seconds.
• The indicator
• The display shows On for a few
seconds and then AP.
• All buttons are inactive except for
the on/off button.
3. When prompted, enter the home
network credentials in My Electrolux
Kitchen app.
If the credentials are not
entered, the dishwasher
cancels the procedure after
some time and returns to the
programme selection.
If the connection is successful, the
indicator is steady and the
letters AP are off. The appliance returns
to the programme selection. Refer to
"Daily use" to activate the remote start.
If the connection is
unsuccessful or the display
shows upd, refer to
"Troubleshooting".
If you want to cancel the procedure,
switch the appliance off and on.
ENGLISH 15
and
flashes.