Bosch Intuvia 100 Instrucciones De Servicio Originales página 13

Note: If you are not going to be using your eBike for
several weeks, remove the on-board computer from
its holder and set the on-board computer to storage
mode. To do so, press the Bluetooth® (1) button for 8
to11 s.
The reset button (5) serves to reset the on-board
computer to factory settings and delete all connec-
tions.
The on-board computer can be operated and the indi-
cators can be controlled via one of the depicted oper-
ating units. The meaning of the buttons on the operat-
ing units for the display indicators can be found in the
following overview.
Depending on how long it is pressed for, the select
button has 2 functions.
LED Remote
Bosch eBike Systems
Mini Remote
Scroll left (only for LED Remote)
Scroll right (only for LED Remote)
Increase assistance level
Decrease assistance level
Select button (press briefly)
Select button (press and hold > 1 s)
Note: All interface displays and texts on the following
pages correspond to the release status of the soft-
ware. The interface displays and texts may change
slightly following a software update.
Note: Depending on the lighting conditions, there is
background lighting that is only activated by pressing
a button. The lighting duration can be adjusted.
English – 11
0 275 U07 3BI | (08.06.2022)