Tips And Advice On Operation; Questions About The Drive; Technical Data - SOMFY Sonesse 40 RS485 Manual De Instrucciones

EN

4.TIPS AND ADVICE ON OPERATION

4.1.Questions about the drive?

Observations
The motorised product does not work. The drive is in thermal protection mode. Wait for the drive to cool down to
NOTICE
If the motorised product still does not work, contact a drive and home automation professional.

5.TECHNICAL DATA

Power supply
Operating temperature
Index protection rating
Safety level
Power wiring
Datas wiring
Duty cycle
NOTICE
For additional information on the technical data for this drive, contact your Somfy representative.
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an
approved collection point for recycling.
SOMFY ACTIVITES SA, 74300 CLUSES FRANCE as manufacturer hereby declares that the drive covered by
these instructions when marked for input voltage 230V~50Hz and used as intended according to these
instructions, is in compliance with the essential requirements of the applicable European Directives and in
particular of the Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Philippe Geoffroy, Approval manager, acting on behalf of Activity director, Cluses, 05/2021.
8
Possible causes
120 V 〜 60 Hz
0° to 60° C
IP31
Class II
Open leads
RJ45 Male
Time ON: 40 s
Time OFF: 60 s
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 40 RS485
Solutions
restart the drive.
Do not touch the drive: risk of burns.
220 V 〜 60 Hz 230 V 〜 50 Hz
0° to 60° C 0° to 60° C
IP31 IP31
Class II Class II
Open leads Open leads
RJ45 Male RJ45 Male
4 min. 4 min.