Understanding The Product; Content Of Delivery; Control Panel - HURNER Weld Control 315 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
3

Understanding the Product

This butt-welding system for plastics can be used both as
an on-site and as a workshop installation, for jointing op-
erations pipe-to-pipe, but also for processing tees and el-
bows (see Sect. 3.4 for more detailed information). The sys-
tem enables welding according to two modes, the Manual
Mode and the Data Logging/Report Generation mode, or
Weld Control Mode for short.
3.1

Content of Delivery

• RFID card with access code of configuration menu
• Tools
• Machine chassis ("basic machine") to secure the parts to
be welded
• Electrical heating element with anti-stick coating
• Electrical facing tool
• Carrying and storage rack for heating element and fac-
ing tool
• Hydraulic and control unit with control panel
• Reducer inserts in the applicable range (refer to Sect. 3.4)
for clamps
• Transport box (model versions with basic machine chas-
sis up to 315 mm)
3.2

Control Panel

Version May 2022 HÜRNER Weld Control 315 2.0 User's Manual
Welding Process Diagram
Pressure Release Valve
Display Screen
Maximum Pressure Regulator
MENU and Cursor Keys
Oil Refill Nipple with Level Probe
START/SET and
STOP/RESET Keys
Carriage Mover Lever
9
EN