Dry Ironing; Shot Of Steam; Vertical Ironing - Di4 Vapore Stiro Healthy 3200 Manual De Instrucciones

CAUTION: Avoid coming in contact with ejected steam.
This iron generates steam by means of a built-in motor, and has two steam production modes. The
mode can be changed by double-clicking the motor activation trigger.
AUTOSTEAM Mode
The "auto" indicator lamp is on.
The iron will automatically set the appropriate steam amount that is suitable for the selected ironing
programme. The steam will be produced continuously.
MANUAL STEAM Mode
The "auto" indicator lamp is off.
Steam production can be controlled manually for steam ironing only when necessary.
For ironing with steam, press the motor activation trigger.
For ironing without steam (dry ironing), do not press the motor activation trigger.

DRY IRONING

The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Set the "MANUAL STEAM" mode. Do not press the motor activation trigger.
Select the setting best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.

SHOT OF STEAM

The shot of steam feature provides additional steam for removing stubborn wrinkles.
1. Choose the "••", "•••" or "max" programme
2. Press the powerful steam button to release the burst of steam
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in continu-
ously and wait almost 5 seconds between pressures.

VERTICAL IRONING

By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments,
etc.)
1. Choose the "max" programme.
2. Press the shot of steam button
WHEN YOU FINISH IRONING
1. Remove the main plug from the wall socket.
2. Empty the water tank
3. Stand the iron on heel rest.
4. Coil the power cable loosely around the heel of the iron
23