Safety Instructions And Warnings - Emos E0121 Guia De Inicio Rapido

Setting 12/24 Hour Time Format
Repeatedly pressing the ADJ button switches between 12/24 h
time format.
Changing °C/°F Temperature Units
Repeatedly pressing the °C/°F button switches between °C and °F.
Setting an Alarm
Press the MODE button; AL icon will appear on the screen.
Then, long-press the MODE button; the minute value will begin
flashing.
Use the ADJ button to set the time for the alarm.
Move between values using the MODE button.
Once the hours and minutes are set, press the ADJ button again.
The alarm icon on the screen indicates the alarm is active.
To deactivate the alarm, press the ADJ button again. The icon
will disappear.
To return to standard time display, wait 1 minute or press the
MODE button.
Snooze Function
While the alarm is ringing, pressing the SNOOZE button postpones
the alarm by 8 minutes.
If you do not want to use the snooze function, press any button
other than SNOOZE when the alarm is ringing; the alarm will trigger
again the next day.
If you do not press any button while the alarm is ringing, the alarm
will be active for 1 minute and will then trigger again the next day.
Memory of Measured Values
Press the MEMORY button repeatedly to display the maximum and min-
imum readings of indoor and outdoor temperatures and indoor humidity.
To erase the memory, long-press the MEMORY button while in max/
min value display mode or press the CLEAR button.

Safety Instructions and Warnings

Read the user manual before using the device. Follow the safety
instructions provided in the manual. The product is designed to serve
reliably for many years if used properly.
• Read the manual carefully before using this product.
5