Mobile Application - Emos P5623 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 134
Procedure for Removing the Front of the Switching Unit
(see Fig. 5)
2, 3 – use a screwdriver to press down and hold the inner lock, remove the front cover

Mobile Application

The thermostat can be controlled using a mobile application for iOS or Android.
Download application SmartTherm
for your device.
QR code for downloading the Android app
QR code for downloading the iOS app
Description of Registration and Login to the Application
(see Fig. 6)
To use the mobile application, you must first register by clicking the Register button.
Fill in your login, e-mail and password and confirm with Register.
After successfully registering, you log in to the application by filling in your e-mail and password
and clicking Login.
If you check the Remember Password field, the application will remember your login information.
In case you forget your password, click Forgot Password.
Enter your e-mail and click Get.
You will receive a verification code to your e-mail which you then fill in the Verification code field.
Then, enter a new password (New password, Confirm password) and confirm with OK.
Attention: The thermostat can only be controlled by 1 user at a time via the application. If another
user wants to control the thermostat, the previous user must log out.
Connecting the Thermostat to a WiFi Network for Control via the Mobile
Application
(see Fig. 7)
First, register to the application then log in by clicking Login.
Then, click on Heating controls, + Add new devices.
Select the type of your thermostat and enter (scan) its ID code.
The ID label is located on the back of the thermostat's stand. (Write down the ID code for the event
of the ID label fading or getting damaged!)
Select your WiFi network, enter the password and click Next (ticking Remember Password saves
the login information).
The application will begin connecting the WiFi network to the thermostat.
Press the
button on the thermostat, followed by -, the arrow will indicate
; confirm
by pressing >.
The screen will display COFI, confirm by long-pressing >, the
icon will begin flashing.
The thermostat will start searching for the WiFi network.
The device will pair with the network within 2 minutes, and the thermostat screen will show the
icon.
If pairing is unsuccessful (
icon will keep flashing), repeat the process.
Viewing Details/Deleting a Connected Thermostat
(see Fig. 8)
Click the 3 orange dots to display Settings, where you can view the details (IP address, MAC etc) of
the connected thermostat.
Clicking Delete removes the connected thermostat from the app menu.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido