Clip Connection - Kärcher NT 14/1 Eco Adv Manual Del Usuario

Ocultar thumbs Ver también para NT 14/1 Eco Adv:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clip connection

Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
Operation
Fold the push handle in/out
Illustration
 Fold the push handle upward. The push
handle will lock into place.
 Press the latches on the side of the
push handle. Fold the push handle
down.
Turning on the Appliance
 Plug in the main plug.
 Switch on the appliance at the main
switch.
Working with electrical power tools
Eco Te Adv only:
Danger
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.
 Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Switch on the appliance at the main
switch.
Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power
tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration
10
All manuals and user guides at all-guides.com
 Adjust the stepped power tool adaptor
Illustration
 Remove the elbow from the handle.
 Insert the connection socket on the
Illustration
 Connect the adaptor to the electric pow-
Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
Illustration
 Press and hold the button on the handle
Illustration
 Press the chassis latches and remove
Illustration
 Clean areas that are difficult to access
 Press and hold the button on the handle
 Switch off the appliance at the main
 Pull out the mains plug.
 Empty the container.
 Vacuum and wipe the appliance inside
3
-
EN
to fit the connection of the electric pow-
er tool.
handle.
er tool.
Semi-automatic filter dedusting
and press the button for the semi-auto-
matic filter cleaning 5 times. The flat
folded filter is automatically cleaned
through an air jet (pulsating sound).
Cleaning areas that are difficult to
access
the vacuum unit.
or steps.
Turn off the appliance.
and press the button for the semi-auto-
matic filter cleaning 5 times.
switch.
After each operation
and outside with a damp cloth.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nt 14/1 eco te adv

Tabla de contenido