Kodak PRINTOMATIC Manual Del Usuario página 7

Ocultar thumbs Ver también para PRINTOMATIC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Refilling Photo Paper
– Only load a single pack of 10 papers and the corresponding blue Color Calibration Sheet in the printer
at one time when the printer is empty. The Color Calibration Sheet will be processed automatically at
the start of each paper pack, calibrating the printer for that specific paper.
Paper Do's & Don'ts
– Do not add more paper until the paper compartment is completely empty.
– Do not fill the paper compartment with more than one 10-pack of KODAK ZINK Photo Paper.
Filling over 10 sheets can damage the printer.
– Do not bend the KODAK ZINK Photo Paper.
– Do hold the paper by its edges. Avoid touching the surface with your fingers.
– When not in use, store KODAK ZINK Photo Paper at temperatures between 68°F and
77°F (20°C and 25°C).
– If you inserted the wrong type of paper, if there is a paper jam, or some other related error, the LED
on top of the camera will blink red. Open your camera and correct the error (clear jam,
replace paper, etc.) and then restart your camera.
Memory
– Your KODAK PRINTOMATIC is designed to capture and print immediately, and can hold up to 3 images
at a time. To save your pictures use an external microSD™ card to extend its memory capacity.
Inserting a microSD™ Card
– Your KODAK PRINTOMATIC accommodates a 32GB microSD™ card. Gently slide the card into the slot
at the bottom of your camera. You will feel a slight click when the card is fully inserted.
Removing a microSD™ Card
– Push on the top of the card to release it. Gently pull to fully remove the card from the camera.
MicroSD™ Card Error Indication
– When the memory on your microSD™ card reaches zero, or if there is an error reading
the card, the LED on top of the camera will blink red.
Transferring Files to Your Computer
– Via USB Cable:
Using a micro USB cable (not included), connect your KODAK PRINTOMATIC to a computer.
Double-click the memory card image when it appears on your computer desktop to view and save
your images.
– Via microSD™ Card:
Remove the microSD™ card from the camera as indicated above. Insert the card into your card reader.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido