Additional Information; Hardware Verification - Agilent Technologies U2600A Serie Guia De Inicio Rapido

Additional Information

Hardware Verification

18
Agilent Connection Expert is one of the utilities of Agilent IO Libraries. It
can automatically detects the USB devices that were connected to the PC
and enables the communication between the USB device and the PC. To
verify that your USB device has established a connection with your PC,
do the following steps.
1 Go to Start > All Programs > Agilent IO Libraries Suite > Agilent
Connection Expert to launch the Agilent Connection Expert.
2 The connected USB device will be visible in the Instrument I/O on
this PC panel as indicated in the following. Select the DIO connection
interface and right- click.
3 A context menu will appear. Click Send Commands To This
Instrument. The Agilent Interactive IO dialog box will appear as shown
below. Click Send & Read to send the *IDN? default SCPI command.
The instrument's response will be displayed in the Instrument Session
History panel.
4 Successful communication between the PC and the connected
hardware indicate successful hardware installation and connection
establishment.
Select the
DIO module
U2600A Quick Start Guide