KTM 61912922044 Instrucciones De Montaje página 33

6.1 Changing the locking cylinder
CHANGING THE LOCKING CYLINDER 6
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking lever.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
502172-01
Installing the locking cylinder
–
Grease and mount O-ring
Long-life grease (
–
Position and insert locking cylinder as shown.
The engaging plate
Engaging plate
502166-01
–
Pull up the locking lever.
–
Position lock handle
The lever points to the right.
–
Mount and tighten screw
Info
The hook looks
cover's lock installation, see Section 8
502167-01
4 7
with washer and hook lock
bl
into the locking cylinder.
3
.
p. 16)
bl
points downward.
bl
engages.
5
on the locking cylinder as shown.
4
with the washer
6
(included) are needed for the
5
.
7
.
13