KTM 61912922044 Instrucciones De Montaje página 35

The hook faces to the right and the opening to the
front.
–
Mount and tighten screw
Info
The steps are the same on both sides.
–
Key position 90° to the left to open.
–
Key position upward for locking.
500634-01
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking device.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
502175-01
Info
The steps are the same on both sides.
4 7
with washer
4 7
with washer and hook lock
bl
into the locking cylinder.
OPTIONAL 7
(included).
6
.
15