Understanding The Control Board - Pit Boss NAVIGATOR PB850GW Manual Del Propietário

UNDERSTANDING THE CONTROL BOARD

CONTROL
"P" SET
PRIME
"P" SET
PRIME
COOK
"P" SET
PROBE 1 "P"SET
FC
ACTUAL
FC
PROBE 2
FC
PRIME
"P" SET
"P" SET
PROBE 1
PROBE 2
PRIME
RIME
PRIME
8
"P" SET
PRIME
DESCRIPTION
COOK
Press the Power Button to power on the unit. The button will glow blue if connected to a power source.
PROBE 1 "P"SET
FC
Press and hold the button for two seconds to turn the unit off. ACTUAL
FC
PROBE 2
FC
The Controller Knob is used to increase or decrease the temperature value. Push the Controller Knob to
confirm the chosen temperature.
The "P" Set Button is used to select one of the eight fine tunings when the Temperature Control Dial is set
to the Smoke Setting. Press the button to change the "P" setting to accommodate to your cooking style and
cooking environment, as preferred. With a short push of the button, the setting increases from P0 to P7, then
COOK
repeats. Adjustments are only possible in the Smoke Setting. Factory default setting is "P4". If the "P" setting
PROBE 1
is adjusted, your preference will be locked-in (saved) until further adjustment is made.
FC
ACTUAL
The "P" Set Button is also used as a Temperature Switch Control to change the temperature readout on
the LCD Screen. Press and hold the button for two seconds to switch to Celsius (ºC) or to Fahrenheit (ºF), as
PROBE 2
preferred. Default is set to Fahrenheit.
FC
The LCD Screen is used as the information center for your unit. The LCD screen will display your Desired Cook
Temperature, Actual Cook Temperature, and the Meat Probe Temperatures (if connected). If only one Meat
Probe is connected, only one reading will be displayed.
The Smoke iT® icon indicates a connectivity with Wi-Fi. When searching for a connection by Wi-Fi or via
Bluetooth®, the Smoke iT® icon will blink. Once a Wi-Fi connection has been established, the Smoke iT® icon
COOK
COOK
will stay solid. When connected, get live updates about the actual and set temperatures of the grill, cooking
PROBE 1 "P"SET
"P"SET
time, and meat probe temperatures. It also allows you to adjust the settings of your Control Board.
FC
FC ACTUAL
ACTUAL
FC
PROBE 2
Press and hold the Prime Button to activate an extra feed of pellets to the burn pot. This can be used to
FC
FC
add more fuel to the fire before opening the barrel lid, resulting in a quick heat recovery time. It can also be
FC
used while smoking, to increase the intensity of clean smoke flavor. Requested from competition cookers.
The plug-in connection port(s) on the front of the Control Board are for a Meat Probe(s).
When a meat probe is connected, the temperature is displayed on the LCD Screen. When not in
use, disconnect the meat probe from the connection port. Compatible with Pit Boss® branded
meat probes only. Additional meat probe(s) sold separately.
COOK
PROBE 1 "P"SET
FC
ACTUAL
FC
PROBE 2
FC
"P"SET
FC
PROBE 1
ACT
SET
NO PELLETS
PROBE 2