VALBERG WF 1014 A W180C3 Instrucciones De Uso página 13

B
Using the appliance
Levelling
necessary). If you want to install the washing machine on a wooden floor, spread the weight by
placing a 60x60 cm plywood board, that is at least 3 cm thick, under the machine and secure
the board to the floor. If the ground is uneven, adjust the four adjuster feet as needed; do not
insert wooden blocks under the feet.
5. Unscrew the lock nut by turning it clockwise (see arrow) using the spanner.
6. Raise the machine slightly and adjust the height of the feet by rotating them.
Higher Lower
7. Important: tighten the lock nut by turning it anticlockwise in relation to the machine.
8 EN