Connecting The Water Inlet Hose - VALBERG WF 1014 A W180C3 Instrucciones De Uso

B

Connecting the water inlet hose

9. If the water inlet hose is not already installed, it must be screwed into the washing machine.
The hose with the blue mark is for supplying cold water only.
10. Screw the inlet hose onto the tap by hand and tighten the nut.
CAUTION:
mixer tap of a non-pressurised water heater.
the water tap on fully.
resistant hose of adequate length (1000 kPa min,
compliant with the EN 50084 standard).
cracks, and replace it if necessary.
non-return valve.
Using the appliance
11
Cool
EN