VALBERG WF 1014 A W180C3 Instrucciones De Uso página 43

C
Shown on the display screen
F01
F03
F13
F14
F24
Other error code, "F04-F98"
Unb
A. "F01" appears on the screen
The machine is not being supplied with water or there is not enough water. Check the following
points:
section).
Press the "Start/Pause" button once the error has been eliminated.
If the error occurs again, contact the after-sales service (see the
After-sales service section).
B. "F03" appears on the screen
The washing machine has not been emptied. The washing machine stops when the program is
running. Switch off the machine and disconnect the power supply. Check the following points:
IMPORTANT: Make sure that the water has cooled
before draining the washing machine.
Useful information
List of error codes
Description of the error
Water inlet problem
Drainage error
Door locking error
Door unlocking error
Overflow or excessive amount of foam
Error with the electronic module
Unbalance alert
.
.
.
40
.
EN
.