Electrical System Overview; Hour Meter; Headlights And Power Outlet; Forward And Rearward Pedals - Husqvarna R 418Ts AWD Manual De Usuario

Electrical system overview

1. Battery
2. Microswitch for the hydrostatic transmission
3. Microswitch for the cutting deck
4. Microswitch for the seat
5. Ignition lock

6. Hour meter

7. Relay
8. Engine connectors
9. Main fuse, 15A
10. Fuse, 7.5A
11. Switch for the power outlet
12. Power outlet (12 V)
13. Switch for the headlights
14. Headlights
Hour meter
The hour meter shows how many hours the engine has
run. The time with ignition on but engine off is not
registered. The last digit shows tenths of an hour (6
minutes).

Headlights and power outlet

Press the power switch (A) to make the headlights come
on or go off.
Press the power switch (C) to set the power outlet (B) to
on or off. The voltage of the power outlet is 12 V. The
4
11
7
10
12
4
5
9
3
6
2
11
4
10
12
5
power outlet has a fuse, see
23 .
B
A

Forward and rearward pedals

The speed is gradually adjusted with 2 pedals. The left
pedal (1) is used to move forward, and the right pedal
8
13
R 418Ts AWD
To replace a fuse on page
C
1
522 - 002 -