To Adjust The Harness - Husqvarna 578BTF Manual De Usuario

3. Attach the intermediate pipe (D) to the control pipe
(B). Make sure that the knob (K) on the control pipe
(B) faces up and goes into the guide track of the
intermediate pipe (D). Turn the intermediate pipe
fully to lock the control pipe and the intermediate
pipe.
B
4. Connect the end pipe assy (blower nozzle and metal
pipe) (G) with the intermediate pipe (D). Make sure
that the arrow marks (E) on the end pipe assy and
the intermediate pipe align. Turn the end pipe assy
fully and make sure that the line (L) aligns with the
arrow mark(E) on the intermediate pipe. Tighten the
pipe knob (F).
D
5. Loosen the clamp (C) and rotate the control pipe
(B) to adjust the position of the pipe knob (F) to the
upside. Tighten the clamp (C).
C
6. To adjust the position of the control handle (H),
loosen the knob bolt (M) by hand. Adjust the position
and tighten the knob bolt.
M
1913 - 001 - 16.08.2022
K
D
E
F
G
L
B
F
H
B
7. Use the cable clamps (N) to attach the cable (O) to
the flexible hose (A).
O
N
A

To adjust the harness

A correctly adjusted harness and product makes
operation easier.
1. Put on the harness of the product.
2. Tighten the side straps until the product is tight
against your body.
Note:
In case of malfunctionon the machine or any
other emergency situation that requires you to free
yourself from the machine, open the buckles on the
harness and let the machine fall backward.
9