Sauder Englewood 426918 Manual De Instrucciones página 23

Step 17
å
Fasten the remaining EXTENSION RAIL (40MA) to the RIGHT END (A).
Use two GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in
the enlarged diagram. Then, slide the inner cartridge of the EXTENSION
RAIL in to find the other hole that lines up with the hole in the END. Turn a
SCREW into this hole.
www.sauder.com/service
4
3
2
3S
GOLD 5/16" FLAT HEAD SCREW
(2 used in this step)
426918
A
1
Open end
7
Page 23