Sauder Englewood 426918 Manual De Instrucciones página 44

Step 38
å
To make adjustments to the DRAWER and FILE DRAWER,
loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the cam
clockwise or counter-clockwise. Notice how the drawer raises
or lowers as you turn the cam. By adjusting the drawer this way,
it will help the DRAWER FRONT line up better when closed.
Tighten the SCREWS when finished with adjustments.
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 44
Cam
426918
13
www.sauder.com/service