Sauder Englewood 426918 Manual De Instrucciones página 40

Step 34
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D133 and D139).
å
Fasten the DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D133) and the
DRAWER LEFT (40CD) to the LEFT DRAWER SIDE (D139). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten one PULL (189K) to the DRAWER FRONT (O). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
3
4
BLACK 9/16" LARGE HEAD SCREW
(2 used for the PULL)
Page 40
Roller end
1
2
189K
O
1S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
10A
D139
D133
3S
426918
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
2
3
4
Drawer Slide
Center the screw in the oval hole.
www.sauder.com/service
5
Roller end
1