Sauder Englewood 426918 Manual De Instrucciones página 37

Step 31
å
Insert a SLIDE CAM (10A) into the FILE DRAWER SIDES (D87 and D88).
å
Fasten the EXTENSION SLIDES (40MC) to the FILE DRAWER SIDES (D87 and D88).
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten one PULL (189K) to the FILE DRAWER FRONT (K). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
3
4
10A
BLACK 9/16" LARGE HEAD SCREW
(2 used for the PULL)
www.sauder.com/service
Open end
1
189K
2
K
1S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D88
D87
4
3S
Center the screw in the oval hole.
426918
10A
1
2
3
Drawer Slide
7
Open end
Page 37