Megger DLRO10 Manual De Instrucciones página 3

Duplex connector system – component parts
Duplex connector test lead with
indicator lights
These duplex test leads are single test leads supplied
without probe or clip test terminations.
FEATURES
Ultra bright LED indicator lights warning of:
■ ■
Hazardous live voltage
■ ■
Test continuity
■ ■
Test complete
■ ■
Pass / fail to set limits (DLRO10X only)
■ ■
Locking ring to prevent test termination disconnection
■ ■
Works with any connector termination
■ ■
Lead resistance :
■ ■
1.5 m long
■ ■
3 m long
■ ■
6 m long
■ ■
Designed to fit and work with:
■ ■
DLRO10
■ ■
DLRO10X
■ ■
DLRO10HD
■ ■
DLRO10HDX
■ ■
TL1.5-CL
Test lead 1.5 m connector lit (1 supplied)
TL3-CL
Test lead 3 m connector lit (1 supplied)
TL6-CL
Test lead 6 m connector lit (1 supplied)
Duplex connector test lead without
indicator lights
These duplex test leads are single test leads supplied
without probe or clip test terminations.
FEATURES
Locking ring to prevent test termination disconnection
■ ■
Works with any connector termination
■ ■
Lead resistance :
■ ■
1.5 m long
■ ■
3 m long
■ ■
6 m long
■ ■
Designed to fit:
■ ■
DLRO10
■ ■
20 mΩ DLRO10X
■ ■
30 mΩ DLRO10HD
■ ■
40 mΩ DLRO10HDX
■ ■
TL1.5-C
Test lead 1.5 m connector (1 supplied)
TL3-C
Test lead 3 m connector (1 supplied)
TL6-C
Test lead 6 m connector (1 supplied)
There are separate versions available to fit the BT51 as
follows:
1006-456
TL3-C-BT51
Test lead 3 m connector for BT51 (1 supplied)
1006-458
TL6-C-BT51
Test lead 6 m connector for BT51 (1 supplied)
1006-459
Duplex connector extension lead
FEATURES
6 m long
■ ■
Locking ring to prevent disconnection
■ ■
Works with any duplex connector test lead without
■ ■
indicator lights
Single extension lead resistance :
■ ■
More than one may be used but take into account overall
■ ■
test resistance
20 mΩ
Note: 10 A operation possible on any 10 A DLRO
■ ■
instrument with:
30 mΩ
Pair of 3 m test leads
40 mΩ
■ ■
Any test probe or clip termination
■ ■
Two extension leads
■ ■
Based on maximum 100 Ωm lead resistance
■ ■
specification
These extension leads are designed to fit any of these test
leads
■ ■ TL1.5-C
1006-452
TL3-C
■ ■
TL6-C
■ ■
1006-454
TL3-C-BT51
■ ■
1006-455
TL6-C-BT51
■ ■
EL6-C
Extension lead 6 m connector (1 supplied)
Note: These extension leads will not fit any of the leads
1007-023
fitted with indicator lights
1007-024
40 m ohms
1006-460