Megger DLRO10 Manual De Instrucciones página 4

Lead test connection terminations available – sold individually
Duplex connector probe
DESCRIPTION
Duplex connector handspike with sprung loaded tips.
FEATURES
Fits any duplex connector test lead or extension
■ ■
Replaceable gold plated, hardened steel, needle point
■ ■
probe tips for excellent low resistance contact
Stainless steel springs to provide 1.3 kg probe force
■ ■
Ideal for general applications on none coated or corroded
■ ■
surfaces
Optional serrated (waffle) tips available
■ ■
Connector to probe tip resistance :
■ ■
Maximum current rating:
Probe spacing between P and C tips:
Will fit:
Any duplex connector test lead and extension lead
Safety:
CATIII 600 V only when suitable terminal covers are used
Spare / optional parts:
Replacement needle tips
Waffle / serrated tips
DP1-C duplex probe 1 - connector
Duplex connector twist probe
DESCRIPTION
Duplex connector handspike with sprung twisting tips.
FEATURES:
Fits any duplex connector test lead or extension
■ ■
None replaceable hardened and tempered square section
■ ■
probe tips
Probes twist while compressing providing 2.4 kg sprung
■ ■
probe force
Ideal for cutting through surface coatings or corrosion
■ ■
Connector to probe tip resistance :
■ ■
14 mΩ
Maximum current rating:
Probe spacing between P and C tips:
10 A
Will fit:
6 mm
connector test lead and extension lead
Safety:
DTP1-C duplex twist probe 1 - connector
2003-551
25940-014
1006-450
Concentric duplex connector probe
DESCRIPTION
Duplex connector concentric handspike with sprung loaded
potential tip
FEATURES:
Fits any duplex connector test lead or extension
■ ■
Connection via an outer hardened and tempered steel
■ ■
crown with two contact points or tips.
Replaceable gold plated, hardened steel, needle point
■ ■
P tip
P tip with stainless steel spring to provide 1.3 kg probe
■ ■
10mΩ
force
Ideal for reaching deeply recessed terminal screws
■ ■
10 A
Ideal for connection to rivet heads or screw/bolt heads
■ ■
10mm
Connector to C crown tip resistance :
■ ■
Any Duplex
Maximum current rating:
<30 V only
Probe tip spacing:
Between two outer C tips 7.6 mm
P tip central between two C tips with 3.8 mm spacing
1006-449
Probe dimensions:
From finger guard to tip 110 mm
Diameter is tapered from 14 mm nearest the finger guard to
11 mm at tip crown
Will fit
Any duplex connector test lead and extension lead
Safety
Spare / optional parts
Replacement P needle tip
Waffle / serrated P tip
CP1-C concentric probe 1 - connector
10 mΩ.
10 A
<30 V only
2003-551
25940-014
1006-448