Megger DLRO10 Manual De Instrucciones página 6

Complete duplex connector lead sets available
Probe lead-sets
DH1-C
3 m duplex handspike lead set, with connector (x2)
DESCRIPTION
Two wire, four terminal duplex twist probe lead set 3 m long
Consists of the following:-
DTP1-C duplex twist probe
TL3-C-BT51 3 m lead connector
Will fit:-
BT51 and BT51 120 V
DH2-C
6 m / 20' version of DH1-C above but only 1 included
Description
Single duplex twist probe lead - 6 m long.
Consists of the following:-
DTP1-C duplex twist probe
TL6-C-BT51 6 m lead connector
Will fit:-
BT51 and BT51 120 V
DH4-C
Two wire, four terminal duplex probe lead set - 1.5 m
1006-442
One lead fitted with indicator lights.
Description
Two wire, four terminal duplex probe lead set 1.5 m long.
One lead fitted with indicator lights.
Consists of the following:-
x2
DP1-C duplex probe
x2
TL1.5-C 1.5 m connector lead
TL1.5-CL 1.5 m connector lead with indicator lights x1
Will fit:-
DLRO10, DLRO10X and DLRO10HD, DLRO10HDX
1006-443
DH4-CHDC
As DH4-C but supplied with DLRO10HD terminal cover for
CAT III 300 V rating
DH5-C as DH4-C but 3 m long
x1
x1
Kelvin clip lead-sets
KC1-TL3-C
KL1-C Kelvin clip 3 m Lead set - connector (x2)
1006-444
Description
Two wire, four terminal kelvin clip lead set 3 m long.
Consists of the following:-
KC1-C Kelvin clip
TL3-C 3 m connector lead
TL3-CL 3 m connector lead with indicator lights x1
x2
Will fit:-
x1
DLRO10, DLRO10X and DLRO10HD, DLRO10HDX
KC2-TL3-C
KL2-C Insulated kelvin clip - Test Lead 3 m connector (x2)
Description
1006-463
Two wire, four terminal insulated kelvin clip lead set 3m
long.
Consists of the following:-
1006-445
KC2-C Insulated kelvin clip
TL3-C 3 m connector lead
TL3-CL 3 m connector lead with indicator lights x1
Will fit:-
DLRO10, DLRO10X and DLRO10HD, DLRO10HDX
1006-462
x2
x1
1006-461
x2
x1