Emos P5616OT Manual De Instrucciones página 11

Holiday Mode
Holiday mode saves power by allowing you to decrease temperature for
1 to 99 days when you are away from home.
1. Move the slider to AUTO.
2. Press the H button to activate Holiday mode.
3. Use + or – to set the number of days you will be away.
4. Then press the
pressing .
This mode will be active until the set number of days elapses or can be
cancelled manually by pressing
Anti-Freeze Mode (OFF)
1. Move the slider to the OFF position; temperature will now be set
to a constant 5 °C.
2. You can cancel anti-freeze mode by moving the slider to AUTO.
Time and Date Setting
1. Move the slider to TIME/DATE; the field for date setting will start
flashing on the display.
2. Press ; the month field with start flashing on the display.
3. Press ; the year field with start flashing on the display.
4. Press ; the hour field with start flashing on the display.
5. Press ; the minute field with start flashing on the display.
6. Press
to confirm the settings or wait 15 seconds for automatic
confirmation.
Calibration of Room Temperature
Move the slider to the OFF position and press H and
time to enter settings for calibration of room temperature; CAL will
appear on the display. Press + or – to adjust the value (-3.0 °C to 3.0 °C,
in 0.5 °C increments).
Press to confirm the settings or wait 15 seconds for automatic
confirmation.
Calibration of room temperature is used for example if the thermostat
shows 21 °C but you want it to show 20 °C. In that case, the calibration
value should be set to -1 °C.
Temperature Differential Setting
Move the slider to the OFF position and press H and
enter settings. Then press the
Settings; „diFF" will appear on the display. Press + or – to adjust the value
(0.2 °C to 2.0 °C, in 0.1 °C increments).
Press to confirm the settings or wait 15 seconds for automatic
confirmation.
button to set the temperature and confirm by
.
button to go to Temperature Differential
11
at the same
at the same time to