en-US
Fault messages
Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Fault messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem
Top light flashes quickly "Comfort handle not recognized" error
Bottom and top lights
are flashing quickly
Bottom and middle
lights flash quickly
180
Possible cause and solution
Remove the Comfort handle and reconnect it (see
"Installation and connection" – "Connecting the
Comfort handle").
Remove the battery, wait for 10 seconds, then
reinsert it.
Internal system fault
Remove the battery, wait for 10 seconds, reinsert
it, and charge it.
"Battery overheating" or "Battery not recognized" er-
ror
Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).