Fault Messages - Miele HS19 Instrucciones De Funcionamiento

en-US

Fault messages


Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Fault messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem
Bottom light flashes
quickly
Bottom and middle
lights flash quickly
Middle and top lights
flash quickly
Top light flashes quickly "Comfort handle not recognized" error
28
Possible cause and solution
Internal system fault
 Remove the battery, wait for 10 seconds, reinsert
it and charge it.
"Battery overheating" error
 Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
"Battery not recognized" error
 Insert an original Miele AP01 lithium-ion recharge-
able battery (HX LA).
 Remove the Comfort handle and reconnect it (see
"Installation and connection – Connecting the
Comfort handle").
 Remove the battery, wait for 10 seconds, then
reinsert it.