Frequently Asked Questions; Cleaning The Pre-Filter; Cleaning The Fine Dust Filter Manually; Customer Service - Miele Blizzard CX1 PureSuction PowerLine Manual De Instrucciones

Frequently asked questions

Always switch off the vacuum

cleaner before attempting to rectify a
fault and unplug it.
Cleaning the pre-filter (Figs. 31 + 32)
The pre-filter is located at the rear of the
vacuum cleaner.
This should be cleaned if it is obviously
dirty.
 Remove the dust container.
 Release the handle of the pre-filter
and remove the pre-filter.
 Rinse the pre-filter under cold running
water.
Do not use detergent!

Do not use any sharp or pointed ob-
jects!
Dry the pre-filter carefully!
 Replace the dry filter in the dust con-
tainer and lock the handle.
 Reinsert the dust container in the
vacuum cleaner.
Cleaning the fine dust filter
manually (Fig. 33–38)
Allow a drying time of 24 hours.
 Remove the dust container.
 Release the fine dust container in the
direction of the arrow and remove it.
 Run a little water into the opening at
the top of the fine dust container.
 Gently shake the fine dust container
back and forth.
This will rinse out the dust.
 Shake the water out of the opening.
 Release the top so that the marking is
pointing to the  symbol.
 Carefully lift the fine dust filter up and
out of the fine dust container.
 Clean the outside of the fine dust fil-
ter under cold running water.
Do not clean the inside of the

fine dust filter.
Do not use detergent.
Do not use any sharp or pointed ob-
jects and do not brush the fine dust
filter.
After cleaning, allow the fine dust fil-
ter to dry for a minimum of 24 hours.
 Clean the fine dust container with wa-
ter and mild detergent.
 Dry the fine dust container carefully.
 Insert the dry fine dust filter into the
dry fine dust container so that the
marking is pointing to the  symbol.
 Lock the top into place so that the
marking is pointing to the  symbol.
 Reinsert the fine dust container in the
vacuum cleaner and lock it into place.
 Reinsert the dust container in the
vacuum cleaner.

Customer Service

Contact in case of fault

In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or Miele Service.
en-US
23